TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth low energy

Home

TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth low energy

Home >> Products >> 4G GPS Tracker >> TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth low energy

TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth low energy

Model NO: TK418

TK418 with Bluetooth is A comprehensive IoT solution to optimize delivery in retail using GPS and BLE equipment. TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth Low Energy (BLE) is a variant of the Bluetooth technology used in many wireless consumer electronics designed for short-range communication, ideal for managing assets of all shapes, sizes, and values.

TK418 GPS tracking devices IoT sensors also serve as Bluetooth Gateways, enabling local communication with other tagged assets and mobile devices for affordable and efficient asset management and sensor monitoring applications.

Inquiry Us

HOW IT WORKS

Our TK418 IOT Asset GPS device with BLE contains Bluetooth beacon BT01 and Bluetooth Gateway. It features Bluetooth 5.0 and GPS that are concealed onsite or wired or mounted into high-value assets to track the location and find the Bluetooth signals nearby. Then the third-party Beacon or our Bluetooth beacon is placed on any of the lower-valued assets such as tools, stocks or pallets.

Our TK418 IOT Asset GPS device with BLE performs the tracking and provides an informative report based on the Beacon and sends it to the GPS tracking platform you have used for monitoring.

IOT GPS asset tracking device with Bluetooth low energy

What is new with TK418

Relay For remotely cut engine,
Temperature sensor used for monitoring temperature,
SOS button used for help,
External battery used for power supplier (18650 LI-ion Battery x 2 4800mAh)
Notes : (Temperature sensor, SOS button, External battery can be only choose one of the three)

TK418/TK419 Function choose one of the 6 hardware

Power cable Positive and negative PIN1 PIN2

ACC PIN3

Relay PIN4

For Bluetooth (Hardware Customization) Pin5 PIN6 PIN7 PIN8:

Bluetooth uses:
(1)Bluetooth host, can connect with BLE Beacon
(2)Driver authentication by smart phone
(3)Note: BLE component occupies 4 ports, Pin5/PIN6/PIN7/PIN8

Serial or GPIO(Default) use PIN5 PIN6

SOS (Default), Battery, GPIO, iButton use PIN7 PIN8”

Cut Engine/Restore

Cut off oil circuits

Server (GPRS/LTE) or Manager Number (SMS) can send cut-fuel-circuit commands to device when needed. Engine can’t start, vehicle will be locked. To make sure safety of vehicle, fuel of vehicle can be cut off only if device has been positioned by GPS and speed of vehicle is less than 20KM/h or vehicle is static.

Recover oil circuits

Server (GPRS/LTE) or Manager Number (SMS) can send recover-fuel-circuit commands to device when needed, device will recover fuel circuits of vehicle.

Product Feature

Network
LTE CAT MI/NB2

GPS/Beidou/GLonass/Galileo/Qzss
Globally support various satellite positioning system

ACC Detection
Engine ignition status

Built-in Battery
Disconnect/Low power Alarm

Certification
GCF, CE, PTCRB, RCM, FCC, IC, JATE, Anatel, FAC, CCC etc.

IP65
Waterproof

Real time tracking
Upload data regularly (GPRS/LTE CAT M1|NB1)

GPIO or RS232 Expansion
I/O or Serial port transfer Signal/data

Built-in G-sensor
Vibration, collision and falling alarm

Alarm function

Temperature alarm
When temperature exceed set range

Vibration alarm
When the vehicle vibration occurs

Speed alarm/cut engine when over speed
Alarm condition when vehicle speed over and below the setting speed
Cut engine Conditions: Cut engine when over setting speed(Restore engine after returning setting speed)

Low battery alarm
When the device is disconnected from external power and built-in battery power falls below a certain value

SOS alarm
When SOS button is long pressed for 3 seconds

Collision/falling alarm
When vehicle Collision or falling occurs

Shift Alarm
When vehicle occur a setting shift in the Flameout status

GEO-fence alarm
When vehicle entry/exit/across the GEO-fence

Power Disconnect alarm
When the device is disconnected from the external power

Specifications

Dimension

89(L)x37(W)x12(H)mm

Cable Length

75mm

Color

Case Black/Rubber Green

Switch

1 For Power on

Battery

140mAh

Weight

46g

Voltage

12/21/36/48/60/72 VDC

Working Current

GPRS(245-265mA); LTE(260mA);

Standby Current

IDLE(2mA@12V)

Temperature-Sensor

± 0.5℃

Temperature-Sensor

Arrange: -30℃~80℃

Working Temperature

-20℃~75℃

Working Humidity

20%～90%RH

GPS Accuracy

5-15m

LBS Accuracy

>100m

GPS Band

1575MHz

GSM Band

850/900/1800/1900MHz

WCDMA Band

B1/B2/B5/B8

GSM Band

850/900/1800/1900MHz

LTE Band

Global bands(1,2,3,4,5,8,12,13,17,18,19,20,25,26,28 and 39)

Antenna

Built-in GSM/LTE CAT M1|NB1 antenna, Ceramics GPS antenna

Module Certificate

GCF, CE, PTCRB, RCM, FCC, IC, JATE, Anatel, FAC, CCC etc.

GNSS Band

1575MHz

GNSS Accuracy

<2M @ Open Sky

LBS Accuracy

>200m (Depend Density of Base Stations)

Hot/ware/cold fix time

<3s，<15s，<60s

Applications

Car rental

Fleet management

Logistics Solutions

Auto finance risk control

Documents, Drawings & User manual

TK418 User Manual

TK418-LTE-CAT-M1-NB1-iOT-TRACKER-MANUAL-EN

TK418 Datasheet

TK418 datasheet download

TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth low energy

TK418 CAT-M1/NB-IOT GPS asset tracking device with Bluetooth low energy

HOW IT WORKS

What is new with TK418

TK418/TK419 Function choose one of the 6 hardware

Cut Engine/Restore

Cut off oil circuits

Recover oil circuits

Product Feature

Alarm function

Specifications

Applications

Documents, Drawings & User manual

Product Images

Stay in touch with the latest news regarding GPS Trackers!